Acute and Chronic Neural and Glial Response to Mild Traumatic Brain Injury in the Hippocampus.

Traumatic brain injury (TBI) is an established risk factor for developing neurodegenerative disease. However, how TBI leads from acute injury to chronic neurodegeneration is limited to post-mortem models. There is a lack of connections between in vitro and in vivo TBI models that can relate injury forces to both macroscale tissue damage and brain function at the cellular level. Needle-induced cavitation (NIC) is a technique that can produce small cavitation bubbles in soft tissues, which allows us to relate small strains and strain rates in living tissue to ensuing acute and chronic cell death, tissue damage, and tissue remodeling. Here, we applied NIC to mouse brain slices to create a new model of TBI with high spatial and temporal resolution. We specifically targeted the hippocampus, which is a brain region critical for learning and memory and an area in which injury causes cognitive pathologies in humans and rodent models. By combining NIC with patch-clamp electrophysiology, we demonstrate that NIC in the Cornu Ammonis (CA)3 region of the hippocampus dynamically alters synaptic release onto CA1 pyramidal neurons in a cannabinoid 1 receptor (CB1R)-dependent manner. Further, we show that NIC induces an increase in extracellular matrix proteins associated with neural repair that is mitigated by CB1R antagonism. Together, these data lay the groundwork for advanced approaches in understanding how TBI impacts neural function at the cellular level, and the development of treatments that promote neural repair in response to brain injury.

Bottlebrush Networks: A Primer for Advanced Architectures.

Bottlebrush networks (BBNs) are an exciting new class of materials with interesting physical properties derived from their unique architecture. While great strides have been made in our fundamental understanding of bottlebrush polymers and networks, an interdisciplinary approach is necessary for the field to accelerate advancements. This perspective aims to act as a primer to BBN chemistry and physics for both new and current members of the community. In addition to providing an overview of contemporary BBN synthetic methods, we developed a workflow and desktop application (LengthScale), enabling bottlebrush physics to be more approachable. We conclude by addressing several topical issues and asking a series of pointed questions to stimulate conversation within the community.

Control of polymers' amorphous-crystalline transition enables miniaturization and multifunctional integration for hydrogel bioelectronics.

Soft bioelectronic devices exhibit motion-adaptive properties for neural interfaces to investigate complex neural circuits. Here, we develop a fabrication approach through the control of metamorphic polymers' amorphous-crystalline transition to miniaturize and integrate multiple components into hydrogel bioelectronics. We attain an about 80% diameter reduction in chemically cross-linked polyvinyl alcohol hydrogel fibers in a fully hydrated state. This strategy allows regulation of hydrogel properties, including refractive index (1.37-1.40 at 480 nm), light transmission (>96%), stretchability (139-169%), bending stiffness (4.6 ± 1.4 N/m), and elastic modulus (2.8-9.3 MPa). To exploit the applications, we apply step-index hydrogel optical probes in the mouse ventral tegmental area, coupled with fiber photometry recordings and social behavioral assays. Additionally, we fabricate carbon nanotubes-PVA hydrogel microelectrodes by incorporating conductive nanomaterials in hydrogel for spontaneous neural activities recording. We enable simultaneous optogenetic stimulation and electrophysiological recordings of light-triggered neural activities in Channelrhodopsin-2 transgenic mice.

Silicone elastomers and the Persson-Brener adhesion model.

Many modern anti-icing and anti-fouling coatings rely on soft, low surface energy elastomeric materials such as polydimethylsiloxane for their functionality. While the low surface energy is desirable for reducing adhesion, very little work considers the larger contribution to adhesive failure caused by the viscoelastic nature of elastomers. Here we examine several different siloxane elastomers using a JKR adhesion test, which was operated over a range of different speeds and temperatures. Additionally, we characterize the dynamic mechanical modulus over a large range of frequencies for each material. We note that surface energies of the materials are all similar, but variation in adhesion strength is clear in the data. The variation at low speeds is related to elastomer architecture but the speed dependence itself is independent of architecture. Qualitative correlations are noted between the JKR adhesion measurements and the dynamic moduli. Finally, an attempt is made to directly compare moduli and adhesion through the recent Persson-Brener model. Approximations of the model are shown to be inaccurate. The full model is found to be accurate at low speeds, although it fails to precisely capture higher speed behaviour.

Mechanical Behavior of Hybrid Thin Films Fabricated by Sequential Infiltration Synthesis in Water-Rich Environment.

Sequential infiltration synthesis (SIS) is an emerging technique for fabricating hybrid organic-inorganic materials with nanoscale precision and controlled properties. Central to SIS implementation in applications such as membranes, sensors, and functional coatings is the mechanical properties of hybrid materials in water-rich environments. This work studies the nanocomposite morphology and its effect on the mechanical behavior of SIS-based hybrid thin films of AlOx-PMMA under aqueous environments. Water-supported tensile measurements reveal an unfamiliar behavior dependent on the AlOx content, where the modulus decreases after a single SIS cycle and increases with additional cycles. In contrast, the yield stress constantly decreases as the AlOx content increases. A comparison between water uptake measurements indicates that AlOx induces water uptake from the aqueous environment, implying a "nanoeffect" stemming from AlOx-water interactions. We discuss the two mechanisms that govern the modulus of the hybrid films: softening due to increased water absorption and stiffening as the AlOx volume fraction increases. The decrease in the yield stress with SIS cycles is associated with the limited mobility and extensibility of polymer chains caused by the growth of AlOx clusters. Our study highlights the significance of developing hybrid materials to withstand aqueous or humid conditions which are crucial to their performance and durability.

Morphoelastic modelling of pattern development in the petal epidermal cell cuticle.

We use the model system Hibiscus trionum as a vehicle to study the origin and propagation of surface nano-ridges in plant petal epidermal cells by tracking the development of the cell shape and the cuticle. In this system, the cuticle develops two distinct sub-layers, (i) an uppermost layer which increases in thickness and in-plane extension and (ii) a substrate, composed of cuticular and cell wall material. We quantify the pattern formation and geometrical changes and then postulate a mechanical model assuming that the cuticle behaves as a growing bi-layer. The model is a quasi-static morphoelastic system and it is numerically investigated in two- and three-dimensional settings, using different laws of film and substrate expansion and boundary conditions. We recreate several features of the observed developmental trajectories in petals. We establish the respective roles of the layers' stiffness mismatch, the underlying cell-wall curvature, the cell in-plane expansion and the thickness growth rates of the layers in determining the observed pattern features, such as the variance observed in the amplitude and wavelength of the cuticular striations. Our observations provide evidence which justifies the growing bi-layer description, and provide valuable insights into why some systems develop surface patterns and others do not.

Adhesion and mechanical properties of poly(dimethylsiloxane) bottlebrush elastomers.

Poly(dimethylsiloxane) (PDMS) bottlebrush elastomers (BBEs) are attractive soft materials with well-controlled bulk mechanical properties. However, their surface and interfacial properties have not been studied in depth. We report a detailed study of the adhesion of PDMS BBEs to glass using a contact adhesion test to determine the critical energy release rates, Gc, as a function of interfacial separation velocity. For BBEs, Gc for initiating separation, G0, was found to be independent of the crosslink density. We hypothesize that the monomer chemistry of side chains plays a primary role in defining surface properties for this materials system. After crack initiation, BBEs showed a significantly lower Gc and less velocity dependence than linear chain networks. Scaling analysis attributes these properties to the faster dissipative relaxation mechanisms within the BBEs. These findings demonstrate that the adhesion properties of BBEs can be finely tuned through the monomer chemistry and side chain length for potential applications.

Predicting the Electrical, Mechanical, and Geometric Contributions to Soft Electroadhesives through Fracture Mechanics.

Electroadhesion is the modulation of adhesive forces through electrostatic interactions and has potential applications in a number of next-generation technologies. Recent efforts have focused on using electroadhesion in soft robotics, haptics, and biointerfaces that often involve compliant materials and nonplanar geometries. Current models for electroadhesion provide limited insight on other contributions that are known to influence adhesion performance, such as geometry and material properties. This study presents a fracture mechanics framework for understanding electroadhesion that incorporates geometric and electrostatic contributions for soft electroadhesives. We demonstrate the validity of this model with two material systems that exhibit disparate electroadhesive mechanisms, indicating that this formalism is applicable to a variety of electroadhesives. The results show the importance of material compliance and geometric confinement in enhancing electroadhesive performance and providing structure-property relationships for designing electroadhesive devices.

Structure-property relationships of velar bone tissue from the energy absorbing horncore of bighorn sheep rams.

Velar bone is the material that fills the horncore of bighorn sheep rams. The architectural dimensions of velar bone are orders of magnitude larger than trabecular bone, and velae are more sail-like compared to strut-like trabeculae. Velar bone is important for energy absorption and reduction of brain cavity accelerations during high energy head impacts, but velar bone material properties were previously unknown. It was hypothesized that velar bone tissue would have properties that are beneficial for increased energy absorption at the material level. Solid velar bone beams were tested using dynamic mechanical analysis and three-point bending to quantify mechanical properties. Additionally, the porosity, osteon population density, and mineral content of the solid velar sails were quantified. The velar bone damping factor (∼0.03 - 0.06) and modulus of toughness (3.9 ± 0.4 MJ/m3) were lower than other mammalian cortical bone tissues. The solid bony sails have a bending modulus (8.6 ± 0.5 GPa) that lies within the range of bending moduli values previously reported for individual trabecular struts and cortical bone tissue. The solid velar bone sails had porosity (6.7 ± 0.9 %) and bone mineral content (66 ± 1 %) in the range of cortical bone values. Interestingly, velar sails contained osteons, which are rarely found in trabecular struts. The velar bone osteon population density (5.8 ± 0.9 osteons/mm2) is in the low end of the range of values reported for cortical bone in other mammals. STATEMENT OF SIGNIFICANCE: Bighorn sheep rams sustain high energy head impacts during intraspecific combat without overt signs of brain injury. Previous studies have shown that the bony horncore plays a critical role in energy absorption and reduction of brain cavity accelerations post impact, which has implications for concussion prevention in humans. However, the material properties of the horncore velar bone were previously unknown. This study quantified the material properties and structure-property relationships of the horncore velar bone at the tissue level. Results from this study will improve our understanding of how bighorn sheep mitigate brain injury during head-to-head impacts and may inspire the design of novel materials for energy absorption applications (i.e., helmets materials that reduce concussion occurrence in humans).

Reimagining Hair Science: A New Approach to Classify Curly Hair Phenotypes via New Quantitative Geometric and Structural Mechanical Parameters.

Hair is a natural polymeric composite primarily composed of tight macrobundles of keratin proteins, which are highly responsive to external stimuli, similarly to the hydrogels and other natural fibrous gel systems like collagen and fibrin.Hair and its appearance play a significant role in human society. As a highly complex biocomposite system, it has been traditionally challenging to characterize and thus develop personal care products. Over the last few decades, a significant societal paradigm shift occurred among those with curly hair, accepting the natural morphological shape of their curls and styling their hair according to its innate, distinct, and unique material properties, which has given rise to the development of new hair classification systems, beyond the traditional and highly limited race-based distinction (Caucasian, Mongolian, and African). L'Oréal developed a hair typing taxonomy based on quantitative geometric parameters among the four key patterns─straight, wavy, curly, and kinky, but it fails to capture the complex diversity of curly and kinky hair. Acclaimed celebrity hair stylist Andre Walker developed a classification system that is the existing gold standard for classifying curly and kinky hair, but it relies upon qualitative classification measures, making the system vague and ambiguous of phenotypic differences. The goal of this research is to use quantitative methods to identify new geometric parameters more representative of curly and kinky hair curl patterns, therefore providing more information on the kinds of personal care products that will resonate best with them and thus maximize desired appearance and health, and to correlate these new parameters with its mechanical properties. This was accomplished by identifying new geometric and mechanical parameters from several types of human hair samples.Geometric properties were measured using scanning electron microscopy (SEM), photogrammetry, and optical microscopy. Mechanical properties were measured under tensile extension using a texture analyzer (TA) and a dynamic mechanical analyzer (DMA), which bears similarity to the common act of brushing or combing. Both instruments measure force as a function of applied displacement, thus allowing the relationship between stress and applied stretch ratio to be measured as a hair strand uncurls and stretches to the point of fracture. From the resulting data, correlations were made between fiber geometry and mechanical performance. This data will be used to draw more conclusions on the contribution that fiber morphology has on hair fiber mechanics and will promote cultural inclusion among researchers and consumers possessing curly and kinky hair.

Control of Polymers' Amorphous-crystalline Transition for Hydrogel Bioelectronics Miniaturization and Multifunctional Integration.

Bioelectronic devices made of soft elastic materials exhibit motion-adaptive properties suitable for brain-machine interfaces and for investigating complex neural circuits. While two-dimensional microfabrication strategies enable miniaturizing devices to access delicate nerve structures, creating 3D architecture for expansive implementation requires more accessible and scalable manufacturing approaches. Here we present a fabrication strategy through the control of metamorphic polymers' amorphous-crystalline transition (COMPACT), for hydrogel bioelectronics with miniaturized fiber shape and multifunctional interrogation of neural circuits. By introducing multiple cross-linkers, acidification treatment, and oriented polymeric crystalline growth under deformation, we observed about an 80% diameter decrease in chemically cross-linked polyvinyl alcohol (PVA) hydrogel fibers, stably maintained in a fully hydrated state. We revealed that the addition of cross-linkers and acidification facilitated the oriented polymetric crystalline growth under mechanical stretching, which contributed to the desired hydrogel fiber diameter decrease. Our approach enabled the control of hydrogels' properties, including refractive index (RI 1.37-1.40 at 480 nm), light transmission (> 96%), stretchability (95% - 111%), and elastic modulus (10-63 MPa). To exploit these properties, we fabricated step-index hydrogel optical probes with contrasting RIs and applied them in optogenetics and photometric recordings in the mouse brain region of the ventral tegmental area (VTA) with concurrent social behavioral assessment. To extend COMPACT hydrogel multifunctional scaffolds to assimilate conductive nanomaterials and integrate multiple components of optical waveguide and electrodes, we developed carbon nanotubes (CNTs)-PVA hydrogel microelectrodes for hindlimb muscle electromyographic and brain electrophysiological recordings of light-triggered neural activities in transgenic mice expressing Channelrhodopsin-2 (ChR2).

Self-spinning filaments for autonomously linked microfibers.

Filamentous bundles are ubiquitous in Nature, achieving highly adaptive functions and structural integrity from assembly of diverse mesoscale supramolecular elements. Engineering routes to synthetic, topologically integrated analogs demands precisely coordinated control of multiple filaments' shapes and positions, a major challenge when performed without complex machinery or labor-intensive processing. Here, we demonstrate a photocreasing design that encodes local curvature and twist into mesoscale polymer filaments, enabling their programmed transformation into target 3-dimensional geometries. Importantly, patterned photocreasing of filament arrays drives autonomous spinning to form linked filament bundles that are highly entangled and structurally robust. In individual filaments, photocreases unlock paths to arbitrary, 3-dimensional curves in space. Collectively, photocrease-mediated bundling establishes a transformative paradigm enabling smart, self-assembled mesostructures that mimic performance-differentiating structures in Nature (e.g., tendon and muscle fiber) and the macro-engineered world (e.g., rope).

Determining the elasto-adhesion length by void collapse in ultra-soft materials.

The elasto-adhesion length (lEA) is a materials property that describes the size scale where the relative importance of adhesion and elastic forces transitions for defined structures and functions. Conventional approaches for determining lEA require independent measurements of the critical energy release rate (Gc) and Young's modulus (E). Herein, we introduce a new method to obtain lEA, only relying upon visual inspection. This method relies upon the introduction of a controlled void within a soft material, for example an ultra-soft hydrogel as studied here. The geometry of the void within the hydrogel is tuned to control the relative strength of adhesion and elastic energy, and a relationship between the observed equilibrium configuration of the void and lEA is derived. We validate this new method with independent force-based contact adhesion tests. This method allows for the easy measurement of lEA for difficult-to-handle soft materials and can be amended for various chemistries and materials.

Mesoscale Polymer Surfactants: Photolithographic Production and Localization at Droplet Interfaces.

Stabilization of fluid droplets, classically as oil-in-water or water-in-oil emulsions, is typically conducted using molecular surfactants or small particulates that localize at oil-water interfaces. In this paper, we describe a method whereby thin polymer films are converted photolithographically to ribbon-like mesoscale objects, which, in turn, adsorb to fluid interfaces where they extend as appendages, or arms, from the droplet surface. These "mesoscale polymer surfactants", or MPSs, were prepared from thin polymer films containing reactive functional moieties, including coumarin for photo-cross-linking, triphenylsulfonium for photoacid generation, and tert-butyl ester for solubility switching. The resultant MPSs, prepared initially on Si substrates, were released into water to reveal an exquisite shape sensitivity (forming straight, bent, or helical structures) and affinity for droplet interfaces based on their preparation conditions and the properties of the surrounding liquid. Notably, the lithographic techniques employed were amenable to differentiating the wettability of MPS segments, affording access to diblock-like MPSs which adhered to dispersed droplets via their hydrophobic segments, allowing their hydrophilic segments to extend into the continuous phase.

Geometry-controlled instabilities for soft-soft adhesive interfaces.

Soft materials interfaces can develop complex morphologies, such as cavities or finger-like features, during separation as a result of a mechanical instability. While the onset and growth of these instabilities have been investigated previously for interfaces between rigid and soft materials, no existing predictive model provides insight for controlling the separation morphology associated with these instabilities when both "sides" of the interface are soft. Here, we expand previous models to account for the geometry and materials properties of two soft materials that form an interface. The total compliance of the system, which depends nonlinearly on the thickness of each contacting soft material, plays a primary role in governing the morphology of the separating interface. We validate this model with experimental measurements using a series of soft elastomers with varying layer thicknesses and fixed materials properties, in order to emphasize the geometry alone can give rise to the observed differences in the interface separation process. This model also demonstrates that the degree of geometric asymmetry, or the ratio of the layer thicknesses that form an interface, influences the stress experienced in either layer, thus providing a rich means of controlling how unstable interface separations develop and propagate. This framework is a powerful tool to understand and control adhesion mechanisms in fields ranging from biology to soft robotics, and provides intuition for engineering a separation mode for a desired end result.

Shaping Nanoscale Ribbons into Microhelices of Controllable Radius and Pitch.

We report fabrication of highly flexible micron-sized helices from nanometer-thick ribbons. Building upon the helical coiling of such ultrathin ribbons mediated by surface tension, we demonstrate that the enhanced creep properties of highly confined materials can be leveraged to shape helices into the desired geometry with full control of the final shape. The helical radius, total length, and pitch angle are all freely and independently tunable within a wide range: radius within ∼1-100 µm, length within ∼100-3000 µm, and pitch angle within ∼0-70°. This fabrication method is validated for three different materials: poly(methyl methacrylate), poly(dimethylaminoethyl methacrylate), and transition metal chalcogenide quantum dots, each corresponding to a different solid-phase structure: respectively a polymer glass, a cross-linked hydrogel, and a nanoparticle array. This demonstrates excellent versatility with respect to material selection, enabling further control of the helix mechanical properties.

Bond strength regime dictates stress relaxation behavior.

Reconfigurable polymer networks are gaining interest for their potential applications as self-healing, recyclable, and stimuli-responsive smart materials. Relating the bond strength of dynamic interactions to material properties including stress relaxation time and modulus is crucial for smart material design. In this work, in situ crosslinked transition metal-terpyridine reconfigurable networks were utilized to modulate the characteristic network stress relaxation time, τR. The use of stress relaxation experiments rather than oscillatory frequency sweeps allowed for the measurement of network bond dynamics across a wider dynamic range than has been previously reported. The stress relaxation time was shown to be tunable by metal center, counterion, and crosslink density. Remarkably, the network crosslinked with covalent-like ruthenium chloride-terpyridine interaction, while having a longer τR, was qualitatively similar to the other metal-ligand networks. Furthermore, the relaxation time was independent of crosslink density in strongly bonded networks, allowing for independent tunability of modulus and τR. In contrast, increasing crosslink density reduced τR in networks crosslinked with weaker interactions.

Cavitation induced fracture of intact brain tissue.

Nonpenetrating traumatic brain injuries (TBIs) are linked to cavitation. The structural organization of the brain makes it particularly susceptible to tears and fractures from these cavitation events, but limitations in existing characterization methods make it difficult to understand the relationship between fracture and cavitation in this tissue. More broadly, fracture energy is an important, yet often overlooked, mechanical property of all soft tissues. We combined needle-induced cavitation with hydraulic fracture models to induce and quantify fracture in intact brains at precise locations. We report here the first measurements of the fracture energy of intact brain tissue that range from 1.5 to 8.9 J/m2, depending on the location in the brain and the model applied. We observed that fracture consistently occurs along interfaces between regions of brain tissue. These fractures along interfaces allow cavitation-related damage to propagate several millimeters away from the initial injury site. Quantifying the forces necessary to fracture brain and other soft tissues is critical for understanding how impact and blast waves damage tissue in vivo and has implications for the design of protective gear and tissue engineering.

Linking cavitation and fracture to molecular scale structural damage of model networks.

Rapid expansion of soft solids subjected to a negative hydrostatic stress can occur through cavitation or fracture. Understanding how these two mechanisms relate to a material's molecular structure is important to applications in materials characterization, adhesive design, and tissue damage. Here, a recently improved needle-induced cavitation (NIC) protocol is applied to a set of model end-linked PEG gels with quantitatively linked elastic and fracture properties. This quantitative link between molecular scale structure and macroscopic properties is exploited to experimentally probe the relationship between cavitation, fracture, and molecular scale damage. This work indicates that rational tuning of the elastofracture length relative to the crack geometry can be used to alter the expansion mechanism from cavitation to fracture during NIC.

Fracture of model end-linked networks.

Advances in polymer chemistry over the last decade have enabled the synthesis of molecularly precise polymer networks that exhibit homogeneous structure. These precise polymer gels create the opportunity to establish true multiscale, molecular to macroscopic, relationships that define their elastic and failure properties. In this work, a theory of network fracture that accounts for loop defects is developed by drawing on recent advances in network elasticity. This loop-modified Lake-Thomas theory is tested against both molecular dynamics (MD) simulations and experimental fracture measurements on model gels, and good agreement between theory, which does not use an enhancement factor, and measurement is observed. Insight into the local and global contributions to energy dissipated during network failure and their relation to the bond dissociation energy is also provided. These findings enable a priori estimates of fracture energy in swollen gels where chain scission becomes an important failure mechanism.